Current Issue

Vol. 14 No. 1 (2025)

International Journal on Theoretical and Applied Research in Mechanical Engineering is committed to publishing high-quality, peer-reviewed research that advances knowledge and improves outcomes worldwide.

May 30, 2025

ISSN (Print) 2319-3182

E-ISSN (Online) 2582-6002

DOI Prefix 10.65521

Published on 2025-05-30

View Full Issue Download Cover Citation

Articles

01

A Review Fabrication of Self-Inflating Tires and Pressure Monitoring Systems

Pravin Thakre , Rahul Jangid, Raj Batho , Darshan Bhadke, Tikeshwar Meshram , Ketan Tonpe pp. 1-4

PDF Abstract
02

Muscle Sensor Driven 3D Printed Prosthetic Arm

Nitinkumar P. Padghan, Kuldip N. Sapekar , Mayur S. Sonakneur , Nilesh M. Masram , Sanjay R. Lolure , Saurabh C. Madavi pp. 5-11

PDF Abstract
03

Design & Fabrication Of Burning Block Making Machine From Agriculture Waste

Rohit Gadre , Harshal Lonkar , Tushar Gahule , Himanshu Aashtankar , Mohit Patle pp. 12-16

PDF Abstract
04

Parabolic Solar Water Heater Efficiency Enhancement Using Live Sun Tracking

Amit Bankar, Prajwal Padole , Jaydev Thakre, Yogesh Bhure , Durgesh Meshram , Vaibhav Kotgale pp. 17-22

PDF Abstract
05

Design and Development of an Arduino-Based Intelligent Object Sorting System

Abhijit Khanpurkar, Prajwal K. Tembhekar, Jaydip N. Bagde, Rohan D. Janbandhu, Khushal R. Moharkar, Suraj W. Godhane pp. 23-28

PDF Abstract
06

A Review Design Analysis And Development of Drive Shaft For Automobile Application With Optimization After Design Includes Weight Reduction

Niwant Karanjekar, Aditya Thute, Abhishek Ninawe , Abhishek Kawalkar , Yugesh Meshram pp. 35-40

PDF Abstract
07

Effect of Print Speed, Infill Pattern and Infill Density on Tensile Strength of Part Produced by ABS Filament Using FDM 3D Printing Technology

Amit Bankar, Ayush M. Sonekar, Aditya R. Kashyap, Aifaz A. Pathan, Rizwan S. Ansari pp. 41-47

PDF Abstract
08

A Review Design & Analysis For Better Directional Stability Of Centrally Suspended Cage-Less Slip Differential And Performance Of Steering Geometry

Krushan Sukhadeve, Dinesh Meshram, Aniket Akhare , Abhishek Gonnade , R. R. Wayzode pp. 48-50

PDF Abstract
09

Enhancing Heat Transfer with Electro-Hydro-Dynamic Techniques: Challenges, Limitations, and Future Directions

Munindra S. Matey , C. N. Sakhale , G. D. Mehta, Sagar D. Shelare pp. 51-66

PDF Abstract
10

Bacteria-Based Self-Healing Concrete Technologies: A Review of Literature and Future Perspectives

Rohit N. Gaidhane, Tushar G. Shende, Alok Rai pp. 67-74

PDF Abstract

View All Articles in This Issue

Vol. 14 No. 1 (2025)

Articles

A Review Fabrication of Self-Inflating Tires and Pressure Monitoring Systems

Muscle Sensor Driven 3D Printed Prosthetic Arm

Design & Fabrication Of Burning Block Making Machine From Agriculture Waste

Parabolic Solar Water Heater Efficiency Enhancement Using Live Sun Tracking

Design and Development of an Arduino-Based Intelligent Object Sorting System

A Review Design Analysis And Development of Drive Shaft For Automobile Application With Optimization After Design Includes Weight Reduction

Effect of Print Speed, Infill Pattern and Infill Density on Tensile Strength of Part Produced by ABS Filament Using FDM 3D Printing Technology

A Review Design & Analysis For Better Directional Stability Of Centrally Suspended Cage-Less Slip Differential And Performance Of Steering Geometry

Enhancing Heat Transfer with Electro-Hydro-Dynamic Techniques: Challenges, Limitations, and Future Directions

Bacteria-Based Self-Healing Concrete Technologies: A Review of Literature and Future Perspectives

Quick Links

For Authors

For Reviewers

Contact Us